QR Code for the RB Switch

The enclosure QR code should open the published RB Switch documentation home page.

QR destination

Use the final GitHub Pages URL for this repository:

https://mrhunsaker.github.io/RB_SWITCH/

The QR code should point to the published home page, not a local development address or temporary file. If the repository is renamed or moved, regenerate the code and update this page.

Home page contents

The home page links to Setup & Pairing, Switch Operation, Firmware, Hardware, Troubleshooting, the Switch Evaluation Package, and this QR Code page.

Enclosure label

A suitable label is:

RB Switch
Scan for instructions

Place the QR code where it can be scanned without opening the enclosure.

Printing tips

• Print the code at least 20 mm × 20 mm, with a blank margin of at least 4 modules (the small squares) on every side.
• Use black on white, or very dark on very light. Avoid low-contrast colors and glossy finishes that reflect light.
• Use a medium or high error-correction level so the code still scans if the label is scuffed.
• Test the finished label with at least one iPhone camera and one Android camera before attaching it.
• Keep the label flat. Avoid placing it over a seam or a curved edge.